THESE FIT -

KTM

SX/F 2004-2015 rear pads
EXC 2004-2015 rear pads

HUSABERG

ALL FE/TE/FS/FX 2004-2014 rear pads

HUSAQVARNA

TE/TC 2014-2015 rear pads
FE/FC 2014-2015 rear pads

FITS ALL SX/EXC MODELS

DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminium and therefore not only look good, they also withstand the toughest treatment? With the anodised aluminium components in the original factory look from the PowerParts range, you can turn your KTM into something very special.
7 mm wider contact surface than standard.

THESE FIT -

KTM

SX/F 2004-2015 rear pads
EXC 2004-2015 rear pads

HUSABERG

ALL FE/TE/FS/FX 2004-2014 rear pads

HUSAQVARNA

TE/TC 2014-2015 rear pads
FE/FC 2014-2015 rear pads

THESE FIT -

KTM

SX/F 1992-2015 front pads
EGS/EXC 1994-2015 front pads

HUSABERG

ALL FE/TE/FS/FX 1994-2014 front pads

HUSAQVARNA

TE/TC 2014-2015 front pads
FE/FC 2014-2015 front pads

FITS ALL SX/EXC REAR BREMBO BRAKES

Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake calliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodised dust cap.

FITS ALL SX/EXC 2009-2015

Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake calliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever. The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodised dust cap. Suitable for the front brake caliper.

THESE FIT -

SX 2004-2015
EXC 2004-2015

The SXS brake calliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power.
When fitting to SX models as of MY 2013, the CNC brake calliper support (777.13.975.010.30) must be used instead of the supplied brake calliper support due to the larger axle diameter.

THESE FIT -

SX 2009-2015
EXC 2009-2015

The SXS brake calliper is manufactured from high-strength aluminium, which makes it stiffer without adding any weight. The increased stiffness of the brake calliper results in a more precise pressure point and improved brake power.

FITS 2004-2015 SX/EXC

DO YOU KNOW that all KTM CNC parts are manufactured from highest quality aluminium and therefore not only look good, they also withstand the toughest treatment? With the anodised aluminium components in the original factory look from the PowerParts range, you can turn your KTM into something very special.